Posts tagged as Beckhoff Automation

Building automation reaches the highest level

Information from Beckhoff Automation With a height of 103 m  and 29 floors, the “KölnTriangle”, officially opened on the 2 September 2006  is one of the tallest buildings in Cologne, Germany. Due to its height, the building designed by architects Gatermann + Schlossig became a political issue from the outset and attracted public attention because of […]

From HVAC to room automation

Beckhoff recently presented its PC- and Ethernet-based control technology for building services applications for the first time at ISH in Frankfurt am Main, Germany. The focus was on heating, ventilation and air-conditioning (HVAC) as an important component of integrated building automation. A truly sustainable and energy-efficient solution can only be achieved through optimum interaction of all building […]

Power distributor box

The new EP9214 power distributor box enables the local distribution and switching off of the power supply, providing the ability to exceed the power limitation specified by typical M8 plug connectors. This innovative I/O solution also provides complete diagnostics and control functionality for up to eight 24 V DC branch circuits per power box. The […]

Beckhoff 099/04CM:Compact servo terminal

The servo terminals from the EL7201 series for the Beckhoff EtherCat I/O system integrate a complete servo amplifier for motors up to 200 W in a standard HD terminal housing. A new advancement in this area, the new EL7201-0010 version supports the ‘one cable technology’ (OCT) equipped on the AM8000 servomotor series instead of the […]

Hygienic design stainless steel servomotor series

With the AM8800 series Beckhoff offers a complete stainless steel servomotor series in “hygienic design” for particularly harsh environmental conditions and applications in the food, beverage and pharmaceutical industries. The servomotors are not only equipped with FDA-compliant materials, but are now also certified with regard to design and materials in accordance with the rigorous requirements […]

Manual operating modules with K-bus interface

These manual operating modules have been developed for the switching, controlling and observation of digital and analogue signals. They enable the setting and reading of data and values in case of failure of a controller, and can be installed in the control cabinet door using a snap-in technique; as they are wired inside the control cabinet. […]